Review-Motherboard Gigabyte G1.Sniper2: Platform Sandy Bridge Bersenjata Lengkap

1. Support for Intel^® Core™ i7 processors/Intel^® Core™ i5 processors/ Intel^® Core™ i3 processors/Intel^® Pentium^® processors/Intel^® Celeron^® processors in the LGA1155 package
2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)

1. Intel^® Z68 Express Chipset

1. 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
   * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
2. Dual channel memory architecture
3. Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
4. Support for non-ECC memory modules
5. Support for Extreme Memory Profile (XMP) memory modules

(Please refer “Memory Support List” for more information.)

1. 1 x HDMI port, supporting a maximum resolution of 1920×1200

1. 1 x Creative CA20K2 chip
2. Support for Dolby^® Digital Live and DTS™ Connect
3. Support for X-Fi Xtreme Fidelity^® and EAX^® Advanced HD™ 5.0 technologies
4. High Definition Audio
5. 2/4/5.1/7.1-channel
6. Support for S/PDIF Out

1. 1 x Bigfoot Killer E2100 chip (10/100/1000 Mbit)

1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
   * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
2. 1 x PCI Express x16 slot, running at x8 (PCIEX8)
   * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode.

   (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
   * To support PCI Express 3.0, you must install an Intel 22nm CPU.

3. 2 x PCI Express x1 slots
   (All PCI Express slots conform to PCI Express 2.0 standard.)
4. 2 x PCI slots

1. Support for AMD CrossFireX™/NVIDIA SLI technology
   * The PCIEX16 slot operates at up to x8 mode when AMD CrossFireX™/NVIDIA SLI is enabled.

1. 2 x SATA 6Gb/s connector (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
2. Support for RAID 0 and RAID 1

Chipset:

1. 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
2. 3 x SATA 3Gb/s connectors (SATA2_2~SATA2_4) supporting up to 3 SATA 3Gb/s devices
3. 1 x eSATA 3Gb/s connector (eSATA/USB Combo connector) on the back panel supporting up to 1 SATA 3Gb/s device
4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
   * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

1. Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, including 1 eSATA/USB Combo connector, 6 ports available through the internal USB headers)

2 x Etron EJ168 chips:

1. Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)

1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 4 x SATA 6Gb/s connectors
4. 3 x SATA 3Gb/s connectors
5. 1 x CPU fan header
6. 4 x system fan headers
7. 1 x front panel header
8. 1 x front panel audio header
9. 1 x S/PDIF Out header
10. 3 x USB 2.0/1.1 headers
11. 1 x USB 3.0/2.0 header
12. 1 x serial port header
13. 1 x Trusted Platform Module (TPM) header
14. 1 x clearing CMOS jumper
15. 1 x heatsink LED power connector
16. 1 x CPU overclocking button header

1. 7 x USB 2.0/1.1 ports
2. 1 x PS/2 keyboard/mouse port
3. 1 x CPU overclocking button
4. 1 x optical S/PDIF Out connector
5. 1 x eSATA/USB Combo connector
6. 1 x HDMI port
7. 2 x USB 3.0/2.0 ports
8. 1 x RJ-45 port
9. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)

1. iTE IT8728 chip

1. System voltage detection
2. CPU/System temperature detection
3. CPU/System fan speed detection
4. CPU overheating warning
5. CPU/System fan fail warning
6. CPU/System fan speed control
   * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.

1. 2 x 32 Mbit flash
2. Use of licensed AWARD BIOS
3. Support for DualBIOS™
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

1. Support for @BIOS
2. Support for Q-Flash
3. Support for Xpress BIOS Rescue
4. Support for Download Center
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for EasyTune
   * Available functions in EasyTune may differ by motherboard model.
8. Support for Dynamic Energy Saver™ 2
9. Support for Smart 6™
10. Support for Auto Green
11. Support for eXtreme Hard Drive (X.H.D)
12. Support for ON/OFF Charge
13. Support for Cloud OC
14. Support for 3TB+ Unlock
15. Support for TouchBIOS
16. Support for Q-Share

1. Norton Internet Security (OEM version)
2. Intel^® Smart Response Technology
3. LucidLogix Virtu
   * Make sure the monitor cable has been connected to the integrated graphics port on the back panel.

1. Support for Microsoft^® Windows 7/Vista/XP

1. ATX Form Factor; 30.5cm x 26.4cm

1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors’ website or 3rd party website.
2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.